ESYLUX PROTECTOR WD 9 V Manual De Instrucciones página 8

INSTALLATION AND OPERATING INSTRUCTIONS
GB
Congratulations on your purchase of this high-quality ESYLUX product. To ensure correct device operation, please
read these installation/operating instructions carefully and keep them in a safe place for future reference.
GB 1 • SAFETY INSTRUCTIONS
Use this product only as intended (as described in the user instructions). Changes or
modifications to the product or painting it will result in loss of warranty. You should check the
device for damage immediately after unpacking it. If there is any damage, you should not install
the device under any circumstances.
If you suspect that safe operation of the device cannot be guaranteed, you should turn the
device off immediately and make sure that it cannot be operated unintentionally.
2 • DESCRIPTION
The PROTECTOR WD 9 V water detector alarm is triggered when both sensor surfaces
on the housing base come into contact with water, which creates an electrical connection
between them.
It is designed for domestic use, to detect leaks in washing machines, dishwashers, etc. or
other water leaks.
In particular, the early warning system can prevent – or at least limit – water damage caused by
in-built appliances or appliances and macerator pumps in basement areas.
The audible alarm is loud and continuous (approx. 85 dB) and can be heard from far away.
The detector has a floating contact, which can be used to connect it to a danger detection
control centre, a telephone dialler, or a similar device.
8