Installation Steps; Care And Cleaning - Auto Ventshade Ventvisor Instrucciones De Instalación

Installation Steps

Align the driver side deflector with the previously
cleaned door frame.
3
With the deflector in its final position, remove re-
maining tape liner by pulling on free ends.
5
4 Piece Set
The rear visor mounts to the door frame utilizing the same installation procedure as above.
7

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost pride in our
products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
Auto Ventshade
™
NOTE: Actual application may vary slightly from illustrations.
Lund International, Ventshade Accessories Division
655 Raco Drive, Lawrenceville, GA 30045
800-241-7219 • Fax 770-339-5839 • Visit us at lundinternational.com
© 2005 Lund International, Inc. All rights reserved.
, the Auto Ventshade logo and the AVS
TM TM
Slide the front end flange between the mirror and
4
Apply pressure along the flange edges to secure in
6
Repeat steps 1 thru 6 for passenger side front
Repeat for opposite side.
logo are trademarks of Lund International, Inc.
TM
Page 2 of 2
the glass.
place.
deflector