Technical Specifications; Packing List; Standard Package Content; Introduction - Selecta SE-100 Manual De Instrucciones

MANUAL DE INSTRUCCIONES CODIGO 80320 REV 0
J
.P. SELECTA, s.a.u.
Sep/2015

3 Technical specifications

Voltage supply 230V 50 Hz as indicated in the machine's features
plate.
Code:
External dimensions (H x W x D) mm
Power
Speed range
Stirring maximum viscosity (mPas)
Weight
Rod diameter (mm Ø)
Maximum torque

4 Packing list

4.1 Standard package content

The standard equipment consists of the following components:
- Stirrer
- Instructions manual

5 Introduction

Stirrer 7000385 is a desktop rod stirrer for an accurate and reproducible stirring.
6 Installation & Operation
• Place the equipment near a power socket and plug it.
• Place the equipment over a flat level surface, strong enough to support the equi-
pment weight.
• Select the appropriate accessories (see section 7).
• Activate the main switch ON/OFF.
• Select the appropriate speed agitation.
CAUTION:
It is advisable to start the agitation with the speed knob at minimum to avoid
splashing.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - web site: www.jpselecta.es
(Sujetas a modificaciones sin previo aviso)
7000385
175 x 75 x 135
100W
60 ... 2000 rpm
100.000 cPs
2.8 Kg
Up to 8.5 (through axis)
450Ncm
Tel 34 93 770 08 77 Fax 34 93 770 23 62
Pag.: 7
700385
80320