miniland baby digimonitor 3.5 touch Manual Del Usuario página 35

VIDEO
Select video and click the icon
appear. When you want to stop recording, touch the above icon again.
If the video recorded is longer than 10 minutes, it will be recorded in several files with this
maximum duration.
PHOTO
Select photos and click the icon
5.2.6.3. QUAD VIEW/CHANNEL (Figure 5
This baby monitor allows you to link up to 4 cameras to a single monitor. Click on the icon
the main menu (I) to access the submenu QUAD VIEW/CHANNEL.
To choose the camera whose image you want to display at any given time, click on the relevant
icon . You can also select the camera to be displayed by clicking on the icon (g) on the home
screen.
One of the main features of this baby monitor is that you can view up to 4 cameras simultaneously,
thanks to its "QUAD VIEW" function. Simply click on the icon
into four parts, each quadrant showing the image from one of the cameras. From this moment
onwards, only the camera which appears inside the red frame will be heard. To listen to the audio
from another camera, push its picture. The red frame will change position to be placed around
the new chosen camera.
If you wish to see one of the cameras in full screen mode, press and hold the image for three
continuous seconds.
If you prefer the monitor to display the image of each camera cyclically, click the icon
the auto switch parameters, access the option "auto switch time" on the Monitor settings menu,
which is explained below.
Note 1: Keep in mind that you won't be able to select the cameras that haven't been connected
to the monitor .
5.2.6.4. NIGHTLIGHT (Figure 6
To turn on the camera nightlight, click the icon
showing the nightlight for each of the 4 possible cameras.
Click on the icon
nightlight.
You can also turn the camera light on and off by clicking the icon (i) on the home screen.
Note: Keep in mind that you won't be able to select the cameras that haven't been connected
to the monitor .
5.2.6.5. LULLABIES (Figure 7-8
You can soothe the baby to sleep by playing a gentle lullaby from the baby unit. To enable this
feature, click the icon
First, choose the camera where you want the melody you select to be played.
After selecting the camera, click the icon of your choice to play one of the 5 lullabies available
turn off the music
You can choose three volume levels to create an ideal atmosphere for the relaxation or fun of
your baby.
It is also possible to activate the lullabies in the camera whose image is displayed on the monitor
by clicking the icon (e) on the home screen. This icon will appear along with the number of the
lullaby selected or a cross if the function is disabled.
Note: Keep in mind that you won't be able to select the cameras that haven't been connected
to the monitor .
to start recording. A red dot and the word RECORD will
to take a photo.
)
of the desired camera and the bulb will turn on
)
in the main menu (I).
or repeat all of them in cycle
)
in the main menu (I). A submenu appears
if it has been activated previously.
35
ENGLISH
and the screen will be divided
and off as does the
on
. To set
,