miniland baby digimonitor 3.5 touch Manual Del Usuario página 38

ENGLISH
PAL: used in most European, African and Asian countries, in some South American countries
and in Australia.
NTSC: used in most of America and Japan.
NB: If you do not have a cable with these features, or cannot locate on, get in touch with our
customer service by calling +34 965 564 200.
· Touch Panel calibration (Figure 25)
If you find that the touchscreen is not responding properly, you can calibrate it.
To do this, access the submenu and mark the four corners of the screen with your finger, as
indicated by the crosses that appear.
If you want to leave the calibration at any point, press the Menu button (5).
· Language (Figure 26)
You can choose the language in which you prefer to display all the options on the monitor from
among the 8 available: Spanish, English, Portuguese, French, German, Italian, Polish and
Russian.
· Recording Schedule (Figure 27)
This baby monitor offers the possibility of programming a specific recording period.
To enable this option, indicate the time you want recording to start and finish. If you want this
option to remain inactive, press OFF.
· Motion Detection (Figure 28)
If you activate the motion detection mode (MD) on the monitor and you have activated standby
mode (see point 5.2.6.6.1) if there is no movement around the camera, the camera will stop
transmitting and the monitor will appear to be off. The monitor screen will turn off when the
camera is not transmitting. If you want to see you baby at any given time, even though there is
no movement, press any button and the image will appear again. To disable this feature and see
the monitored area continuously, disable the MD mode on the monitor.
MD mode OFF: The camera transmits continuously, enabling you to continuously monitor your
baby or the area you want to protect.
MD mode ON: The camera only transmits when it detects motion of sufficient intensity, according
to the level selected, around the camera.
To enable or disable this feature, click on the first of the icons that appear on the screen. You
must also select the camera's sensitivity level to motion detection from the 3 levels available.
It also has an additional feature which allows the recording of images for a programmable time
period when the camera is activated on detecting a movement.
You can enable or disable this option by clicking on the icon and choose the length of the
recording period from the available options by clicking on . You can also enable or disable the
motion detection by touching the icon (p) on the main screen.
· Vibrator Function (Figure 29)
This feature allows parents to be in silence when they need peace and quiet and is a great help
in noisy surroundings and for the hard of hearing.
When the sound in the baby's room exceeds a certain threshold, the monitor vibrates to alert
the parents.
You can enable this feature by pressing the icon or disable it pressing this one . You also
can enable or disable this function by touching the icon (d) on the main screen.
· Reset To Factory Default (Figure 30)
This option allows you to return to the parameters and option initially programmed in the factory.
To return to the initial configuration, check the YES box and accept the selection.
WARNING: all device settings are restored to their factory parameters.
38