Fold-Out Stand; Getting Started; Batteries; Ac Adaptor (Main Unit) - Oregon Scientific AWS899 Manual De Instrucciones

FOLD-OUT STAND

GETTING STARTED

BATTERIES

Batteries for the remote and main units are supplied
with this product. Press the RESET button whenever
you change batteries.
The main unit uses:
• 3 x UM-4 (AAA) 1.5V batteries
The thermo / hygro sensor uses:
• 2 x UM-3 (AA) 1.5V batteries
The optional UV sensor uses:
• 4 x UM-3 (AA) 1.5V batteries
NOTE Insert the batteries in the remote unit before you
set up the main unit. Do not use rechargeable batteries.
1. Fold-out the stand
2. Lock it into place

AC ADAPTOR (MAIN UNIT)

When the main unit is plugged into the power socket
or batteries are inserted for the first time, an opening
animation will be shown before the Main Menu screen.
Connect the AC adaptor to your
weather station's AC socket located on
the side of the main unit base stand.
NOTE Batteries are for memory backup purposes
only; the AC adaptor should power the main unit.

REMOTE SENSOR (RTGR328N)

This product is shipped with a RTGR328N Thermo-Hygro
Sensor. The main unit can collect data from up to 6
sensors (5 Thermo-Hygro Sensors and 1 UV Sensor).
The following sensors are compatible with the main unit:
• THGR228N
• THGR238N
• THR228N
• THGR328N
The RTGR328N sensor collects temperature and
humidity readings, and signals from official time-
keeping organizations for the radio-controlled clock.
6