Symbols And Pictograms - Garant SG1 Manual De Uso

1.6

Symbols and pictograms

DE DE
Warnings are identified by a warning triangle with the hazard symbol and warn of hazards which can result
in personal injury and/or damage to property.
EN
Warning!
!
Caution!
FR FR
!
Note!
IT IT
ES ES
Commands are identified by a circle enclosing a hazard symbol or by a square with instructional text. They
require an activity or the use of specific objects.
Safety glasses
CZ CZ
Gloves
PL PL
Activities
RU RU
ZH ZH
Note: The Hoffmann Group cannot be held liable for damage caused by using the unit for purposes
other than the intended use or by disregarding safety instructions and warnings.
32
Risk of death or serious physical injury!
If the warning is disregarded there is a risk of death or serious physical injury!
Risk of minor physical injury!
If the caution is disregarded there is a risk of minor physical injury!
Information to allow an action to be performed particularly efficiently,
and so as to avoid damage.
Risk of injury to the eyes!
Wear safety glasses! During the heating phase, parts of the hot metal surfaces
may fly off and cause injuries!
Risk of injury!
Sharp edges or metal swarf attached to the tool
can cause cuts.
Therefore wear safety gloves!
are identified by the symbol
of the result may be listed below the activity.
Example:
Lower the coil
Set the shrink fitting time
Remove the tool
and indicate the named activity. An explanation