Taking Weight And Body Fat Readings; Programming The Guest Mode - Tanita BC-718 Manual De Instrucciones

TAKING WEIGHT AND BODY FAT READINGS

After programming your personal data you are ready to take a reading.
1. Select Personal data Number
Press the USER button to turn the unit on.
Press the Up/Down buttons to select personal data number.
Press the SET button.
The display will show "0.0".
Now step onto the platform.
Note: If you step onto the scale before "0.0" appears the display will show "Err" and you will not obtain readings.
2. Get Your Readings
After the measurement is taken, readings will be automatically displayed in the order listed below.
After the last result reading is displayed, the weight reading will again appear, then the unit will automatically shut off.
The user may use the RESULT button to scroll through the different results.
For advanced scrolling, the user may press and hold RESULT button.
Upon reading the desired readings, release the button to view the result, readings will appear for 40 seconds before the unit
automatically shuts off.
Note: Do not step off until "ooooo" disappears.
Note: For children (age 5-17), the unit will only display the Weight, the BMI and the Body Fat %.
Weight
RESULT
RESULT
Total Body Water %
RESULT
3. PAST Function
To obtain previous reading, press the PAST button while the current readings are being displayed.
Press the PAST button again to go back to the current readings display.

PROGRAMMING THE GUEST MODE

Guest mode allows you to program the unit for a one-time use without reading a personal data
number.
Press the USER button to activate the unit. Press the Up/Down buttons to select "-0-". Press the SET
button. Then follow the steps: Set Age, Select Female or Male, and Specify the Height.
Step onto the scale after "0.0" is shown on the display. Your weight will be shown first, continue
standing on the scale until the body fat % reading is shown on the display. The reading will be shown
for 40 seconds.
Note: Do not step off until "ooooo" disappears.
Note: If you step onto the scale before "0.0" appears the display will show "Err" and you will not obtain readings.
BMI Body Fat %
RESULT
BMR
Metabolic Age
(kcal Þ kJ)
RESULT
Visceral Fat
RESULT RESULT
Bone Mass
RESULT RESULT
Muscle Mass
RESULT
Physique Rating
5