Troubleshooting - Singer SteamWorks Pro Manual De Instrucciones

Ocultar thumbs Ver también para SteamWorks Pro:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 44
PROBLEM
The unit fails to steam
Two indicating lamps do
not illuminate
The unit fails to steam
Two indicating lamps do
not illuminate
Excessive gurgling of
hose and steam nozzle
Steam is intermittent
SINGER
®
is a registered trademark of the SINGER Company Limited S.à r.l. or its
affiliates.
E_Instruction Manual.indd 11

TROUBLESHOOTING

• Steamer is not plugged in-plug into electrical outlet.
• Household circuit breaker/ground fault interrupter
is tripped or fuse is blown-check the power outlet
or if further assistance is needed, call a qualified
electrician.
• Mineral build-up in the unit - follow the Removing
Mineral Build-up procedure.
• The water tank is empty-refill the water tank.
• Condensation in hose - some gurgling is a natural
effect of the steam process.
• For excessive gurgling, extend the hose vertically to
allow water to drain back into the water reservoir.
• Mineral build-up in the unit-it's normal for the unit to
periodically stop steaming for a few seconds.
• If the steam stays off for longer periods, follow the
Removing Mineral Build-up procedure.
REASON & SOLUTION
GBR
11
12.12.2011 17:18

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Swp.02

Tabla de contenido