TECshow ION 1915Z Manual De Usuario página 7

Installation
The device could be either put on a solid and even Surface, or
mounted upside down or sideways like left picture.
The mounting place must be sufficient stable and be able to
support a weight of 10 times of the unit's weight. When the
fixture is hanged, always additionally secure the device with
the safety chain, fasten the safety rope at a suitable position
so that the maximum fall of the projector will be 20 cm
How to do mounting installation.
ION 1915Z
ENGLISH VERSION
Step one: Installation the clamp onto the omega
bracket;
Step two: Install the clamp and bracket on the bot-
tom of panel, fasten the quick-locks;
Step three: Install the whole device onto appropri-
ate truss and fasten the clamps, tight the safety rope
with the truss or other fixing point at a suitable posi-
tion that drop down distance not exceed 20 cm.
p. 7