Assembly Inumbrina Base Plate; Assembly Inumbrina Into Abachus - Extremis INUMBRINA Manual De Instrucciones

ASSEMBLY INUMBRINA ON BASE PLATE
WHAT YOU NEED
1 person
no. 10 spanner
no. 4 hex key
+/- 20 min.

ASSEMBLY INUMBRINA INTO ABACHUS

WHAT YOU NEED
1 person
+/- 5 min.
Insert the Inumbrina parasol in the Abachus anchor tube
and fasten it by turning the adjusting screw clockwise.
Always tighten the adjusting screw until the Inumbrina
can no longer revolve on its axle.
ATTENTION
: It is only possible to combine Inumbrina
25 with the Abachus.
1. Fasten the (table) anchor tube to
the base plate using the provided
bolts and blind nuts, as shown on
the drawing. The tabletop should
be assembled in the same way.
Always make sure that the two
handles are situated one above the
other and that the adjusting screw
is hidden under the tabletop.
2. Insert the Inumbrina parasol
in the anchor tube and fasten it
by turning the adjusting screw
clockwise. Always
the adjusting screw until the
InUmbrina can no longer revolve
on its axle.
english
tighten
5