Instructions - turbionaire D20AD Manual De Instrucciones

7. Replace the filter
To enable filter replacement reminder: When the air purifier is on, stop and restart the product,
it will start a reverse count. When the filter has accumulated 2000 hours, the indicator light for
replacing the filter will light and a beep will sound. After replacing the filter with a new one,
hold for 3 seconds the filter icon , at the same time the alarm will stop.
8. To activate or deactivate ambient light, briefly press the filter reset button.
9. Timer
The air purifier has a Timer function which can be set in how many hours it should
turn off automatically, you can choose: 1H - 2H - 4H - 8H.
10. Ventilation during sleep
Touch the icon,
the icon and the reduced ventilation light at a comfortable level. Touch the same
icon to return to the previous menu.
11. Negative ions (for models equipped with this function)
Touch the icon to open/ close the option, the light of the icon is fully on to deactivate the
function, the light of the icon flashes to activate the function.

INSTRUCTIONS

* Before you turn on the machine for the first time, be sure to remove the filter bag
before you can use it.
1. Air purifier filter installation
Grasp the handle of the lower lid (the position indicated by the arrow Figure 1) and
turn in the direction of release. Remove the filter (the element shown in Figure 2),
and remove the filter bag. Put it back in the cover, then insert the bottom cover into
the device and turn it in the locking direction.
Picture 1
(replacement reminder)
adjust to the Sleep position, all the LEDs will turn off, except for
Bottom cover
rotating handle
Filter bag
7