Function Introduction; Control Panel Description; Function Description - turbionaire E20AT Manual De Instrucciones

Function introduction

Control panel description

NO. Button
1
Power Button
2 Fan speed
3 Filter replacement
1. Standby
Insert the plug of air purifier into power source, the buzzer will ring, and all
the indicators will lighten. After three seconds, air purifier is in standby mode,
only "Power button"
illuminate.
2. Power on
Press the top power button, all buttons light turn white.
3. Fan Speed
Press this
"Sleep" - "Medium" - "High" - "Auto" *
4. Replace the filter
To enable filter replacement reminder: When the air purifier is on, turn off and restart the
product, it will start a reverse countdown. When the filter has accumulated 2000 hours,
the indicator light for replacing the filter will light and a beep will sound. After replacing
the filter with a new one, hold for 5 seconds the filter icon
alarm will stop.
indicator lights up, the other icon lights do not
button to adjust the fan speed as desired:
(replacement reminder)

Function Description

Turn on and off function
Press the wind speed button to adjust
"sleep" - "medium" - "high" - "auto" *
Keep pressing for 5 seconds
to reset the filter.
*Auto function is available for some models
6
* depending on the model
, at the same time the