Precautions - turbionaire E20AT Manual De Instrucciones

1. Use in a flat and strong place to avoid short circuit, electric leakage,
fire, etc. due to dumping during use.
2. Use in places where water is not easily accessible, avoiding the cause
of short circuit and fire
3. Do not place containers such as vases of water on the body of the machine
to avoid insulation cracking after seepage into the machine, causing
Note
leakage, short circuit, fire and damage to this product.
4. It is not used in places where oil or flammable gas may leak, so as to avoid
leakage and concentrated around the machine, which may cause fire or
fire.
5. It is used indoors and is not used in places where there is direct sunlight
and is exposed to rain.
1.Please do not block the air inlet and outlet of the product to
avoid overheating inside the machine and damage the product.
2. Not placed next to the heating appliance, there is a possibility that
the melting body will cause a fire .
3. o not dismantle the product for renovation, to avoid fire,
electric leakage, injury .
4. In the case of long-term no use, remove the plug from the socket
for safety.
Warning
5. Do not move the product while the machine is working, to avoid leakage.
6. U plug the power cord when cleaning the product, replacing or
cleaning the filter.
7. fter the machine has stopped running for 3 minutes, the front panel
can be opened to prevent the wind wheel from being damaged by
inertia.
8. o not sit on the body of the machine to avoid injury from tilting or
tipping over.
9. Does not cause damage to the power cord, the weight, clamping,
and lifting will cause the power cord to break, causing short circuit,
poor contact, fire, etc.
Precautions when place
Precautions when using
8