Start steaming by brushing material lightly with the grain of the fabric in an up/down vertical motion.
position.
condensation. If the appliance begins to gurgle, rest the steam head on its support for a
few moments in order to direct any build-up of condensation into the appliance once again.
occurrence due to condensation. To limit condensation, do not press the steam head too
heavily on the Roll and Press panel.
recommendations before steaming. We also recommend testing the garment
and effect on the garment on an unobtrusive area such as an inner seam.
steaming (fig. 17).
and cross it over the garment using the Roll & Press for vertical support (fig. 17).
the hanger (fig. 19).
accessory) against the fabric and the vertical support.
frequently in order to avoid the formation of condensation. A gurgling noise
may be heard if the flexible pipe is pinched.
through the holes of the steam head, raise the steam hose occasionally to
remove condensation inside.
Tips for better results with your
garment steamer and Roll & Press system
14