turbionaire LINEA 90 Manual De Instrucciones página 11

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48
INSTALLATION
A. Installing on the concrete wall:
4.1.1 Removed the mounting plate
Remove the plastic parts, unclamping the
fixed screws on the back of main body to
remove the mounting plate.
MOUNTING PLATE
PLASTIC PARTS
4.1.3 When the cement has freeze,
fit the mounting plate (use the
washer and nut according to the
following)
4.1.2 Fix the bolts in the proper position
(fix the position with the mounting plate
and pour cement into the bolt holes.)
2
1
1
2
4.1.4 Install the main body
Set the main body onto the upper end of the
mounting plate, and clamp it as below. Make
sure it's well fixing

Publicidad

Tabla de contenido
loading

Tabla de contenido