Electric Work - turbionaire LINEA 90 Manual De Instrucciones

ELECTRIC WORK

N A B C PN
OPERATION
6.1 Turn on the power switch
6.2 Select the air speed：High[H]、Low[L]
6.3 According to the installation place to adjust the wind direction parts to obtain the best
effect.
CAUTIONS
a) Use the unit at the rated voltage and frequency indicated on the nameplate.
b) Disconnect power source before unit servicing.
c) Routine maintenance must be done every year.
d) Never use petrol, benzene, thinners or any other such chemical for cleaning the unit.
e) Don't allow water or any liquid to enter the motor.
f) When power supply comes from a socket, the plug must be in accordance with
IEC335-1. When the power cord is connected directly ,all polarity switches that the
contract gap is 3mm at least must installed in the charging line.
g) In order to avoid injure, must changed the line of air curtain by professional worker or
factory when the line happened trouble.
BLUE(BROWN/RED)
HEATER
HEATER
K1
RED RED
4 5
RED
A1
MOTOR
KM
A2
BLUE
WHITE
BROWN
BLACK
RECEIVER
I/O
(BROWN)
YELLOW
c
YELLOW
(BROWN)
RECEIVER
IC