Main Components - Grouw 18002 Manual De Usuario

bs bs
1 1
2 2
bn bn bo bo

Main components

1. Ignition nozzle for charcoal and
briquettes
2. Flat nozzle
3. Scraper nozzle
4. Concentration nozzle
5. Separate handle
6. Shaft
7. Cord and plug
8. On/off button
9. Button for angling handle
10. Cord clip
11. Hanger
12. Weed nozzle
13. Hot air nozzle
14. Temperature selector
15. Handle
16. Shaft thread
17. Cord holder
3 3
4 4
9 9
bm bm
bl bl bl
Assembly as a weed burner
Screw the shaft (6) to the motor section's
thread (16). Screw the separate handle (5) to
the other end of the shaft (6).
Secure the cord (7) to the shaft (6) using the
cord clips (10).
Press and hold the button (9) and turn the
handle (15) so that the hot air nozzle (13)
extends out of the handle (15).
Attach the weed nozzle (12) to the hot air
nozzle (13).
If you want to use the weed burner as a heat
gun, remove the shaft and the separate
handle and turn the handle so that the hot
air nozzle is angled correctly in relation to the
handle.
Choose the nozzle suitable for the task in
hand.
5 5
bs bs
6 6
8 8
bq bq
bp bp
7
GB
br br
19