Install The Hardware - Zyxel NWD-170D Manual Del Usuario

2 Install the Hardware

Do not install the hardware until you have
installed the software from the CD.
1 Locate an available card slot on your computer.
2 With the pin connectors facing
the slot and the side with LEDs
facing up, slide the NWD-170N
into the slot. The NWD-170N's
LEDs (lights) turn on if it is
properly inserted.
Never bend, twist or force the NWD-170N into
the slot.
If the LEDs on the NWD-170N are not on after
you have installed the utility and the NWD-
170N, remove the NWD-170N and reinsert it.
ENGLISH
6