Propelling Mower; Handle Height Adjustment - Snapper 7800179 Manual Del Usuario

Ocultar thumbs Ver también para 7800179:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Starting and Operation (Continued)
Propelling the Mower
1. Start the engine. Refer to the Section entitled "Starting
and Operation – Engine and Blade".
2. Begin squeezing the wheel drive control (A, Figure 4)
back toward the handle to engage the wheel drive and
propel the mower forward. Forward speed can be
increased by squeezing the wheel drive control further
back toward the handle.
Figure 4: Wheel drive control
(Components removed for clarity)
Stopping
1. Stop forward motion of the mower by releasing the
wheel drive control.
2. Stop the engine and blade by releasing the blade
control.
8

Handle Height Adjustment

The height of the mower handle can be adjusted as follows:
1. Turn the two locking cams (A, Figure 5) a quarter-turn to
unlock the handle assembly (B).
2. Align the handle assembly with one of the three handle
height adjustment holes (C) in the mounting brackets.
3. Return the locking cams to their original position to lock
the handle.
A
Figure 5: Adjusting the handle height
!
DO NOT attempt any maintenance, adjustments or service
with engine and blade running. STOP engine and blade.
Disconnect spark plug wire and secure away from spark
plug. Engine and components are HOT. Avoid serious
burns, allow sufficient time for all components to cool.
C
B
WARNING
A
!
www.snapper.com

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido