Husqvarna WRE 125 2011 Manual Del Usuario página 56

4- SPEED / LAP TIMER (STP) (figure 4)
- SPEED: speed - maximum value: 299 Km/h or 299
mph;
- STP 1: miles/kilometres covered time
- Reading from 0:00 to 99:59:59 (data will be lost
after disconnecting the battery).
To activate the function STP, push the SCROLL button
(A) and hold for more than 3 seconds.
- 1st step: activate function;
- 2nd step: stop counters
- 3rd step: reset STP;
- 4th step: activate function;
- 5th step: stop counters
.............................
and so on
EN - 12
5- SPEED / HOUR COUNTER (figure 5)
- It counts the engine running hours in 30-minute inter-
vals up to 30 hours maximum (the information will be
lost when battery is disconnected) .
While the function is displayed press the SCROLL (A)
-
key for over 3 seconds to delete the data stored.
6- INSTRUMENT PANEL DIAGNOSTICS (figure 6)
- The instrument panel is capable of indicating malfun-
ctions.
If the warning light (3) starts to flash while you are
riding the motorcycle, stop immediately and contact
the nearest authorised service centre.
3