7 Liter Personal Fridge/Warmer
OPERATION
1. Make sure the unit is off before connecting to a power source. The power
switch should be in the middle position.
2. Using only the DC power cord provided, connect one end of the cord to the
port on the front of the unit.
3. With vehicle running, plug the other end of the power cord into the
cigarette lighter socket in your vehicle or other 12 volt DC power supply
(10 amps minimum).
4. Slide the power switch into the position of the desired function.
Mode
Warming
Cooling
Off
5. Observe the indicator light next to the mode you have set the unit to. The
red indicator should illuminate for warming and the green indicator should
illuminate for cooling.
6. Place your consumable items inside the storage compartment and close
the lid. Do not overfill the unit so that the lid is not able close firmly on the
magnetic latch. Keep lid closed during operation and re-close it quickly
when adding and removing items.
7.
Before turning your vehicle engine off, switch the unit off and unplug it
from the DC socket. Clean the unit as soon as possible after use. Follow the
cleaning instructions under "Care & Maintenance" before storing away.
3
by Wagan Tech
™
Icon
www.wagan.com
®
Position
Up
Down
Middle