Setting The Time; Setting The Date - Piaget 1205P Manual Del Usuario

1205P
ADJUSTING THE FUNCTIONS
WINDING THE MOVEMENT
Self-winding watches are wound by the movement of the wrist when the watch is worn.
If the watch has not been worn for around 44 hours, wind it by hand with the crown in
position 0, that is, turn the crown in the clockwise direction (around 10 turns of the crown
are sufficient to restart the mechanism).

SETTING THE TIME

Pull the crown out to position 2, then turn it clockwise or anti clockwise to position the
hands. Push the crown back to position 0 after the adjustment.

SETTING THE DATE

Pull the crown out to position 1, then turn it anti clockwise to select the desired date.
Since the date change occurs at midnight, make sure you distinguish midnight from
noon when proceeding to the adjustment. In order to avoid damaging the mechanism,
we advise you not to adjust the date between 9 p.m. and 3 a.m. Push the crown back to
position 0 after the adjustment.
8
ULTRA-THIN SELF-WINDING MECHANICAL MOVEMENT,
DATE, SMALL SECONDS
D AT E
28
60
9
C L O C K W I S E
0 - 1 - 2
A N T I C L O C K W I S E
S M A L L S E C O N D S