Disinfection; Use; Accessories Preparation; Compressor Preparation - DTF PURENEB AEROSONIC+ Manual De Uso

b) Disinfection
Before the first use and after each session:
1. Dismantle
each element
Nota: after cleaning in boiling water the tubes colour may turn to white but this would not affect the good operating of your
nebulizing kit.

4. Use

a) Accessories preparation
Please respect the following steps.
1. Fix the M selector on the
top part of the nebulizing
kit.
4. Screw the top part to the
tank.
b) Compressor preparation
Please respect the following steps.

Connect the pressure tube to the pressure inlet of the compressor (and for SONIC nebulizing kits, the vibrations
tube to the corresponding compressor inlet).

Connect the device to the mains.

For ENT treatment, switch the device on SONIC. Sound vibrations automatically alternate with periods without
sound vibrations.

For broncho-pulmonary treatment, switch the device on CLASSIC.
2a. Place the elements in boiling
water for 20 minutes
5. Fix the nose or mouth piece
or the mask to the nebulizing
2b. Use a baby bottle sterilizer
with microwave
OR
2. Insert the jet-pipe on the
bottom part.
kit.
13/59
3. Let the elements dry on a
clean cloth
3. Pour the medicine into
the tank.
6. Connect the pressure tube to the
inlet as shown (and the vibrations tube
to the top part of the SONIC kit).