sanindusa PLAN Instrucciones De Montage Y Manutencion página 51

INDICATOR
The red LED indicator in the sensor blinks when the user steps within the sensor's range.
CAUSE
Connectors between the electronic unit and the solenoid valve are disconnected.
SOLUTION
Connect the connectors of the electronic unit to the solenoid valve.
INDICATOR
The red LED indicator in the sensor blinks when the user steps within the sensor's range.
CAUSE
Debris or dirt in the solenoid valve clog up the bleeding hole
SOLUTION
Unscrew the solenoid, pull out the plunger and the spring from the solenoid and clean them. Clean them
with pressure or use scale remover material if nedeed.
//TROUBLE – SHOOTING