topmark T8031 Manual De Instrucciones página 10

ASSEMBLING/USING
Carry cot configuration:
WARNING: Configuration with carry cot is from 0kg to 9kgs.
The two carrycot configuration is only available when using supporting
adapter on rear frame receptors.
Please check the following configurations before attach any
components.
EN
1. Fix the right and left carry cot adapter by sliding into
the joint.
2. Pull frame wires out until it clips into the holder on
both sides.
3. Fit inner skirt to carry cot ensuring that
the canopy holes line up with the hole in the skirt.
10