V-TAC VT-2000WRD Manual De Instrucciones página 12

NOTE:The device will indicate a beep sound while setting the functions
FUNCTIONS
(Mode, Time, Temperature, "+" & "-" )
ICON
_
+
NAME
Press the timer button once, the icon will flash, press "+" or "-"
to select the desired range of time between 1min to 24 hours.
Timer
The timer countdown will display on the LCD display screen.
"+" and "-" Buttons are used for setting the temperature/ timer
range. These button will only function when setting timer/
"+ & -" Button
temperature settings.
ON/OFF Switch is present on the side of the glass heater.
Ensure heater switch is powered ON(after powering ON
ON Switch
main plug) and OFF (before powering OFF the main plug)
When the heater switch is powered ON ( ) the heater will
OFF Switch
indicate with beep sound indicating the device is now ON
Temperature Temperature sensor detects the temperature in the room and
Sensor displays the same on the LCD display of the heater.
TABLE 1
FUNCTION
10
ENGLISH