Power Supply; Battery Safety Precautions; Mains Operation - Elta 6698RB Manual De Instrucciones

Setting up location of the device
• Avoid vibrations, impact or tilted surfaces as the internal parts may be seriously damaged.
• Do not place heavy objects on the player.
• Never place the player on amplifiers or other devices, which can become hot.
Unpacking:
• Take out carefully the device from the packing and remove all packing materials.
• Keep the packing for further use, if the device must be returned to the customer service.
• If you want to dispose the packing material, adhere to the disposal regulations.
• Carefully remove the laser lens protection from the CD drive.

Power Supply

Whenever possible, connect the unit to the mains power supply to conserve battery lifetime. Disconnect the
mains plug before inserting the batteries.
Battery Operation (Batteries Not Included)
Open the battery compartment and insert 6 batteries type LR-14, UM-2 or C (preferably Alkaline). Please
observe correct polarities which are marked with "+" and "-" in the battery compartment.
For battery operation disconnect the small mains plug at the rear of the unit.
When connecting the mains cord the unit is automatically set to mains operation.

Battery Safety Precautions:

- Always follow the safety and use precautions of the battery manufacturer.
- Keep batteries away from children and pets.
- Never throw batteries into the fire. Do not expose batteries to fire or other heat sources.
- Battery disposal: exhausted batteries must be properly disposed of and recycled in compliance with all
applicable laws. For detailed information contact your local municipality's waste authority.
- Do not mix new and exhausted batteries.
- Do not mix different battery types, such as Alkaline and zinc/carbon. Only use batteries of the same type.
- Remove the batteries when the device will not be used for extended periods of time to prevent damage due
to rusted or corroded batteries.

Mains Operation

- Connect the mains power cable to an AC 230V~50Hz wall outlet.
- Operate the unit only with power supply that corresponds with the specifications on the type label.
- Insert the smaller plug of the power cord into the AC~ jack at the rear. Make sure the plug is completely
inserted.
15.