Raider RD-DH02 Manual Del Usuario página 8

8 www.raider.bg
EN
Congratulations for the purchase of hammer drill from the successfully growing brands - RAIDER. As being
properly installed and operated, RAIDER are safe and reliable machines, and work with them will bring a real pleasure.
For your convenience has been built an excellent service network of 45 service stations across the country.
Before using this hammer drill please carefully acquaint to these "instructions for use".
In interest of your safety and to ensure proper use, read these instructions carefully, including the recommendations
and warnings in them. To avoid unnecessary errors and accidents, it is important that these instructions must remain
available for future reference to all who will use the machine. If you sell it to a new owner "Instructions for Use" must
be submitted along with it, so that new owner can meet with the relevant safety measures and operating instructions.
EUROMASTER Import Export Ltd. is an authorized representative of the manufacturer and owner of the trademark
RAIDER.
Adress: Sofia City 1231, Bulgaria "Lomsko shausse" Blvd. 246, tel 02 934 33 33, 934 10 10, www.raider.bg; www.
euromasterbg.com; e-mail: info@euromasterbg.com.
Since 2006 the company introduced the system of quality management ISO 9001:2008 with scope of certification:
Trade, import, export and servicing of hobby and professional electrical, mechanical and pneumatic tools and general
hardware. The certificate was issued by Moody International Certification Ltd, England.
Parameter
Model
Nominal supply voltage:
AC Frequency:
Rated power
Impact rate
Grip type
Maximum energy per stroke
Insulation protection class
Sound pressure level LPA
Sound power level LWA
Vibration emission at break / side handle / ah (CHeq) m / s2
8.470, deviation K = 1.5m / s2
Vibration emission at break / main handle /
ah (CHeq) m / s2 7.451, deviation K = 1.5m / s2
Items displayed:
1. Locker
2. Antivibration additional handle
3. Adjust the position of the additional handle
4. Basic handle
5. Accessory (Shell, Chip)
6.On/Off switch3
Original instruction manual
Dear Customer,
Technical Data
Unit value
RD-DH02
-
V AC 230
Hz 50
W 1600
min 1600
-1
hexagonal 30 mm
J 46
-
dB 87(A), K
dB 105, K
WA
8.470, deviation
m/s
2
K=1.5m/s2
7.451, deviation
m/s
2
K=1.5m/s2
II
= 3 dB
PA
= 3 dB