Operator Control; Switching On / Off; Channel Change (Optional With Tuner); Volume And Sound Settings (Only With Integrated Loudspeaker) - JVC CO-46LCD-BD Manual De Usario

Operator control

Switching on / off

Indication on operation (Power On) (blue)
Indication when on standby (orange)

Channel change (optional with tuner)

Channel information

Volume and sound settings (only with integrated loudspeaker)

12
The device is switched on.
Please note the mains switch must be in position "I"
(see page 10 below).
The indicator Power On lights up blue on the device.
If a signal is pending at any input, the device is
switched automatically to standby mode after a waiting
period.
The indicator Power On lights up orange on the device.
If a signal is available at any input, the device is
switched on automatically.
S
IR sensor for
remote control
S
With the buttons [P
S
S
With the buttons [0...9] on the remote control:
Select the channel number directly by pressing the
buttons [0...9].
With the channel overview in the OSD menu:
S
S
S
With the buttons [VOL
control:
S
S
To switch off the device you must set the mains
switch in position "0"
Select TV mode by pressing the [TV] button on the
remote control.
] / [P ] on the remote control:
Y B
Press the button [P ] to increase the channel num-
Y
ber.
Press the button [P ] to reduce the channel
B
number.
Press the button [LIST] on the remote control to dis-
play the channel overview on the display.
Select a channel with the buttons [
the remote control.
Press the red button to close the channel overview.
] / [
" A
Press the button [VOL ] to increase the volume.
"
Press the button [ VOL] to reduce the volume.
A
] on
BY " A
VOL] on the remote
ENGLISH