Use Of The Picture-In-Picture Function - JVC CO-46LCD-BD Manual De Usario

Use of the picture-in-picture function

The picture-in picture function offers you the possibility of viewing a second picture source in addition to watching the TV
programme.
The second reception unit (tuner), DVD player or SAT receiver can be used as the picture source. These have to be connected
to the input jacks HDMI1 or HDMI2 on the rear side of the device.
Main
picture
Main
picture
ENGLISH
Picture in
Picture
(PIP picture)
Secondary
picture
Information about the
main picture
Information about the
secondary picture
With the button on the remote control switch the
sound to mute.
S Press the button , the sound is now mute.
S Press the button again to cancel out mute again.
You can also use the button [VOL
Picture-in-Picture (PIP)
S
Press the [PIP] button on the remote control.
Split screen
S Press the [PIP] button on the remote control again.
The large and small pictures last selected can be
seen next to each other.
S Swap between the main and secondary picture
(picture-in-picture) with the button [
on the remote control or under the menu option
<Display ⇒ Quick swap
S To terminate the picture-in-picture function press
the [PIP] button on the remote control once or twice
or under menu option <Display ⇒ Layout> set
Single.
S
Press the button [i] on the remote control to display
the information about the main and secondary pic-
tures.
Settings
S Menu option <Layout>
Single - Single screen
PIP - Picture-in-Picture
Split Screen - Divided display
S Menu option <Secondary input>
With the buttons [ ] / [ ] select a Secondray input
" A
via the remote control.
Without the OSD menu you can select a Secondary
input source by pressing the [TV] / [VIDEO] /
[SOURCE] / [F4] button.
For the combinations between source and Secon-
dary input please refer to the table on page 14.
S
Menu option <PIP Size>
If you have set picture-in-picture, you can alter the
size of the PIP picture.
S Menu option <PIP Horiz. Pos.>
If you have set picture-in-picture, you can alter the
horizontal position of the PIP picture.
S Menu option <PIP Vert. Pos.>
If you have set picture-in-picture, you can alter the
vertical position of the PIP picture.
] to do this.
"
PIP] or [F2]
"A
>.
13