Osd Settings - JVC CO-46LCD-BD Manual De Usario

OSD settings

18
S
Press the [MENU] button to open the main menu.
S With the button [ ] or [ ] select the <Setup> menu.
A "
S Select <OSD> with the button [
the button [ ].
"
Time Out
Under the menu option <Time Out> you can alter the
display duration (time after last actuation up to mask
out) of the OSD menu.
S Select <Time Out> [ ] / [
Y
S You can select one of the following possibilities:
OFF; 5, 10, 15, 20, 25, and 30 seconds [
Transparency
The function <Transparency> offers the possibility of
changing the transparency of the OSD menu.
S
Select <Transparency> [
S You can switch off the transparency or change it wit-
hin the range 1 to 10 [
A
The value 10 is the maximum transparency of the
OSD menu.
Show Logo
In the menu option <Show Logo> the logo displayed
upon switching on or in the absence of a signal can be
switched on or off.
S Select <Show Logo> [
Y
S Select On or Off [ ] / [
A "
Reset to factory defaults
You have the option of resetting all changes made in
the OSD menu back to the original default setting.
S
Select <Reset to factory defaults> [
S Press the button [ ] and choose Yes and press the
"
button [ ] again to reset to the default settings.
"
The device switches automatically off and on again.
The station list is unchanged.
Setting the language
The first time your device is installed the language for
the OSD menu is set in accordance with your selec-
tion.
You can change the language setting in the menu
option <Language>.
S Select <Language> [ ] / [
Y
S
Select the language [ ] / [
A
The following languages can be selected: German,
English, French, Spanish, Italian, Dutch, Danish,
Swedish, Norwegian, Finnish, Portuguese, Polish
and Russian.
TTX Setup
Select a character set for teletext mode: WEST, EAST,
RUSSIAN or ARABIC.
This is governed by the language setting of the teletext
used. Please use the option WEST for west Europe!
] or [ ] and press
Y B
].
B
] / [ ].
A "
] / [ ].
Y B
] / [ ].
"
] / [ ].
B
].
] / [ ].
Y B
].
B
].
"
ENGLISH