BMW 01 29 9 790 109 Instrucciones De Montaje página 5

F 38 65 147 B
Fit amplifier (1) on basic support bracket (2) as
illustrated with cable connection facing downward
and firmly tighten with four pan-head tapping
screws (3).
b
Illustration shows front side.
F 39 65 339 B
First connect adapter lead (1) to the amplifier.
Attach plug connector (2) from adapter lead to
connector block (3).
Using large screwdriver (4), press plug connector (2)
in direction indicated by arrow until it can be heard
to lock into the amplifier casing.
F 38 65 148 B
Secure excess length of auxiliary wiring harness (1)
under amplifier (2) on basic support bracket (3) with
cable ties (4).
b
The line must be tied back in a figure of eight.
Only now install the basic support bracket with
amplifier.
c
Section 7
Converting Footwell Trim Panel
Section dropped
F 38 65 149 B
Ø 10 mm
Drill hole to Ø 4.5 mm
E38
Place on rear side of basic support bracket
Drill hole to Ø 4.5 mm
Ø 10 mm
6
c