EINHELL ERGO TOOLS E-SB 800E Manual Del Usuario página 7

Anleitung E-SB 800 E SPK 7 04.08.2004 8:37 Uhr Seite 7
GB
On/Off switch:
To switch on: Press switch A
Continuous operation: Lock switch A with
locking button B
To switch off: Press switch A briefly
The speed is varied by applying more or less
pressure on switch A. You can preselect the
speed by turning the knurled screw in switch A.
A
B
Rotary switch set for drilling mode. Wait for the
drill to stop before changing!
Please note: This switch should be
in 'drill' position when drilling holes in tiles.
Rotary switch set for hammer mode. Wait for
the drill to stop before changing!
Additional grip
1. You can ensure that your posture is firm while
you are working by turning the auxiliary handle.
Release the handle by turning in an anti-clock-
wise direction and then turn. Then retighten the
auxiliary handle.
2. In addition, you can also adjust the auxiliary
handle to your working position. To do this, pull
the auxiliary handle downwards and then turn it
to the desired position.
7