Before Use; Scope Of Delivery; Assembly Procedure; Static Alignment - Nabtesco NK-6 Symphony Manual De Instrucciones

38

3. Before Use

3-1 Scope of Delivery

Please confirm that the following items are
included.
・NK-6 Symphony ...................................... 1
・User's Guide ............................................ 1
(After explaining the instructions for use,
hand it to the user.)
・Instruction Manual (this document) ......... 1

3-2 Assembly Procedure

3-2-1 Static alignment

Perform static alignment according to the
following procedure.
● Alignment of frontal plane
Complete alignment so that the load line
passes through the center of the knee
joint and falls in the heel center of the
foot section.
● Alignment of sagittal plane
As shown in Fig. 7, complete alignment
so that the weight load line passes
through the center of the knee axis of the
knee joint within a deviation of ±5 mm
(0 mm recommended).
Improper alignment may result in poor
self-lock
applied to the parts may accelerate wear.
For users who wear hip prostheses and
play any sports such as golf, use of a
CAUTION
torsion adapter is recommended. If the
adapter is not used, large torsion force
will be applied to the prosthesis, and
wear of parts may be accelerated.
Fig. 7 Statistic Alignment
performance. Excess
EN – 10
load
±5 mm
(0 mm
recommended)
Center of the
frontal upper axis
P.12