Safety Instructions - Ergo Fix 78250 Instrucciones De Empleo

ENGLISH
TABLE OF CONTENTS

1. Safety instructions

2. Assembly
ATTENTION
Before using your Ergofix wooden workbench, first read this
manual thoroughly, so that accidents can be prevented.
1. SAFETY INSTRUCTIONS
•
Do not apply an unbalanced load which could result in the workbench tipping
over.
•
Do not stand or climb on the workbench. It could fall or tip over causing
serious injury.
•
Do not store the workbench outdoors or in a damp location.
•
Avoid applying excessive force when using woodworker's vise and dogs.
Be sure the work top is securely locked in place before using.
•
When using a power tool with the workbench, always follow the safety
instructions in the power tools owner's instruction manual.
•
Always wear safety glasses or eye shields when using hand or power tools.
•
Never mount power tools directly in the woodworker's vise jaws. The pressure
may damage the tools.
•
It is essential that you maintain an even clamping pressure of the
woodworker's vise on the work piece.
•
Always keep your work area clean, uncluttered and well lit. Do not work on or
place workbench legs on floor surfaces that are slippery from sawdust, oil,
water or wax.
•
Keep visitors and children a safe distance away from the work area,
especially when you are operating a power tool. Visitors should wear same
safety equipment as the operator.
•
Dress for safety. Do not wear loose clothing, gloves, neckties or jewelry
(rings, watches); they can get caught and draw you into moving parts. Always
wear no-slip footwear and tie back long hair.
page 8
page 9
8