Emptying The Dirt Container; Filter Cleaning; Storing The Vacuum Cleaner - Concept VP4201 Manual Del Usuario

EN

EMPTYING THE DIRT CONTAINER

1. Ensure that the vacuum cleaner is off.
2. Press the dirt container release button and separate the container from the main body of the vacuum cleaner with
the nozzle facing downwards (Fig. 9).
3. Make sure the nozzle is still pointing downwards and pull out the filter (Fig. 10).
4. Empty the contents of the dirt container into the municipal waste bin.
5. Replace the filter and push the dirt container into the main body until it clicks into place.

FILTER CLEANING

1. Remove the filter located next to the dirt container.
2. Remove the plastic filter cover - grasp the plastic cover and filter and turn it counter-clockwise.
3. Remove excess dust from the filter cover with a soft and clean brush.
4. Rinse the filter under running water. You can also use a non-abrasive detergent.
5. Allow the filter and cover to dry for 24 hours. Before assembling the filter, make sure that it is completely dry.
6. Replace the filter cover - grasp the plastic cover and filter and turn clockwise until the filter clicks into place.
REMOVING AND CLEANING THE MAIN BRUSH
1. To remove the main nozzle from the rod vacuum cleaner, press the release button and release the nozzle from the
main unit.
2. Turn the nozzle upside down.
3. Using a small coin, turn the lock counter-clockwise (Fig. 11).
4. Release the plastic cap from the nozzle (Fig. 12).
5. Pull the brush out of the nozzle.
6. You can now remove tangled hair, etc. from the brush. If necessary, use scissors to remove the hair, but be careful
not to cut the bristles of the brush.
7. Once the brush is cleaned, reattach it - insert the star-shaped end (Fig. 13).
8. Then insert the other, square end of the brush.
9. Put on the plastic cover, hold the top and turn the lock clockwise to lock it in place
Fig. 9 Fig. 10

STORING THE VACUUM CLEANER

The vacuum cleaner can be securely hung using the wall mount that comes with the product. This will prevent the
product from tipping over and getting damaged.
1. Choose a suitable place in your home where you want to hang the vacuum cleaner.
48
Fig. 11 Fig. 12 Fig. 13
VP4201