Fracarro Firenze 16.1 DVR Guía De Referencia Rápida página 29

Quick Reference DVR FIRENZE
Nْ Instructions
1 Take the DVR and disconnect all the cables.
2 Remove all the screws (7) on the rear (3) and lateral panel (2+2).
3 Remove the cover as shown.
4 From the bag of DVR accessories take the 2 brackets and fix them
on the HDD using the 4 screws.
5 From the bag of DVR accessories take the 4 screws and fix the
HDD on the DVR and connect the data and power cables.
6 Return to the step number 4 to install the other 3 optional HDD.
7 It is possible to install, as optional, a DVD writer that will be
placed in the housing of the third HDD. To install this device
remove the 2 screws and the plastic cap.
8 From the bag of DVR accessories take the 2 brackets, fix them on
the DVD writer and install the device on the DVR connecting the
cables.
9 Using all the screws close the cover, connect the monitor and the
power supply. Now the DVR is installed and ready to use. Please
refer to the manual to setup the time and format all the HDDs.
29/141
Picture