Environmental Protection - Eldom coffea MK150 Manual De Instrucciones

- Remove the unground coffee beans from the container (2);
- Disassemble the container (2) by twisting it counter-clockwise;
- Clean the abrasive surfaces located in the upper section of the housing (5) with a soft
brush. Watch out for the sharp edges of the abrasive surfaces;
- Use a brush in cleaning the containers (2) and (6) and the covers (1) and (7) in warm
water including an addition of a washing liquid and then rinse them under a stream of
tap water;
- Be extremely cautious while cleaning the abrasive surfaces situated in the lower section
of the container (2). The edges of abrasive surfaces are sharp and it is recommended to
clean them with a soft brush;
- Dry the abrasive surfaces after cleaning;
- Before putting all elements together, make sure they are dry. Clean the housing of the
device with a damp cloth. Never plunge the housing in water or rinse it under a stream
of running water.

ENVIRONMENTAL PROTECTION

- the appliance is made of materials which can be recovered or recycled
- the appliance should be handed over to the appropriate centre of collection and
recycling of electrical and electronic equipment
12|EN