Before You Begin; Tools Needed - Barrette VERANDA 34107834 Instrucciones De Instalación

WARNING:
• Improper installation of this product can result in personal injury. Always wear safety goggles when
cutting, drilling and assembling the product.
• Incorrect installation may cause harm to the gate or individual.
• Not pool code approved.
NOTICE:
• DO NOT attempt to assemble the kit if parts are missing or damaged.
• DO NOT return the product to the store, for assistance or replacement parts call: 1-877-279-4496.

BEFORE YOU BEGIN:

Vinyl rail posts require an internal
support system for weight-bearing
purposes and therefore a post install
kit or wood post is required inside a
post jacket. Post install kit and wood
post needs to be purchased separately.
Rail Rail
Top View of Post Jacket
Gate Kit
Component list:
QTY Description
2 Vinyl Uprights
2 Aluminum Stiffeners
4 Caps
1 Gravity Latch
6 1" Phillips Screws (For Gravity Latch)
2 Telescoping Metal Braces
4 #8 x ⁄ " Screws (For Metal Braces)
3
4
4 #8 x ⁄ " Screws (For Metal Braces)
3
8
4 #10 x 1" Screws (For Bottom Rail Brackets)
2 Compact Butterfly Hinges
8 1" Phillips Screws (For Hinges)
1 Allen Wrench (For Hinges)
To obtain and review a copy of the warranty please visit: barretteoutdoorliving.com. You may also contact us at
1-877-279-4496 or email Cs.outdoorliving@barretteoutdoorliving.com
2
Purchased
Post Install Kit
Vinyl Upright
Screws For Metal Braces
Aluminum Stiffeners
Caps

TOOLS NEEDED:

Vinyl Rail
Vinyl Rail Brackets & Screws
Tape Measure
Level
Hacksaw
Rubber Mallet
Drill
⁄ " and
5
32
#2 Square Drive Bit
3" Wood Blocks
Safety Glasses
Pencil
Hinges
Allen Wrench
1" Phillips Screws
Metal Braces
⁄ " Drill Bits
1
8
Gravity Latch
1" Phillips Screws
1" Screws For
Bottom Rail
Brackets
Vinyl Upright
Caps