Logitech Mobile Stereo HS210 Manual Del Usuario página 3

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Check for Phone Compatibility
The Logitech® Mobile Stereo™ HS210 is compatible with most Bluetooth® mobile phones. Consult your
phone manufacturer for more information on compatibility.
Charge Headset Battery
The Logitech® Mobile Stereo™ HS210 comes with a lithium-ion rechargeable battery that must be fully
charged before you use the headset for the fi rst time.
1. Turn off the headset. Connect the power adapter to the headset. Plug the AC adapter into the
electrical outlet.
2. The charge LED will be green while headset is charging. If the LED is not green, check the connection.
3. When the headset is fully charged, the green LED turns off. Charging can take up to 3 hours.
4. Remove the AC adapter from the headset.
5. Your headset is now ready for pairing. See page 4, or the Quick-start Guide for details on pairing.
Charge LED
3
English
Pairing Your Host to a Mobile Phone Using Bluetooth®
Wireless Technology
You must pair your headset to a mobile phone using Bluetooth® wireless technology.
For more details, refer to your mobile phone user guide or contact the phone's manufacturer.
1. Turn on your phone. Make sure the battery is charged in both devices. Turn off the headset.
2. Press and hold the Multifunction button until the headset indicator light fl ashes blue and red
(about 10 seconds).
3. The headset now is in Pairing mode. Release the button. The indicator light will continue fl ashing
red and blue.
4. Follow the pairing instructions for your Bluetooth® phone. Typically, this is done by going to
a "setup" or "connect" menu on your phone and then selecting the options to "discover"
Bluetooth® devices.
5. Your phone should fi nd the 'Logi_HS210' headset. Confi rm to pair.
6. Your phone should prompt you for a passkey or PIN. The PIN/passkey is: 0000.
7. If pairing was successful, the headset LED will fl ash blue.
8. If pairing fails, turn the headset and phone off and repeat the process.
9. If headset and phone are not paired within 3 minutes, the indicator light will fl ash red 3 times and
the host will turn off.
Multifunction
button
4
English

Publicidad

Tabla de contenido
loading

Tabla de contenido