Automatic Image Cropping - Kodak P811 Guia Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

The filmstrip is fed into the slot and scanned. The Power and Status/Card indicator lights blink while
scanning.
 Common filmstrip length is up to 6 negatives. To prevent poor image quality, reserve adequate
space behind the scanner for the filmstrip to complete the scan feeds.
 While scanning a filmstrip, the scanner automatically recognizes the filmstrip type (negative) and
determines the best suitable scan and color enhancement settings for scanning.
 The scanner scans filmstrips at a higher resolution; therefore the scanning speed is slower than
that of photo scanning. This is not a malfunction.
 If the filmstrip is pulled out from the scanner while scanning, the scanning process remains for a
few seconds and then stops. This is not a malfunction.
When scanning is completed, the Power and Status/Card indicator lights blink while the scanner stores
the photo on the memory card.
Wait until the indicator lights stop blinking before inserting and scanning the next photo.
CAUTION: Insert only one filmstrip at a time, and insert the next filmstrip only when the previous one is done. Otherwise
the scanner may malfunction.
 Do not remove the memory card or disconnect the power supply or batteries while the indicators are blinking.
 This scanner produces JPEG (.jpg) file formats. The date/ time attribute are not added.
 If the memory card is nearly full (less than 10MB remaining), the Status/Card indicator blinks (refer to "Indicator Lights" on
page 7). Use another card or transfer pictures to your computer.
To remove the 35mm Negative adapter after all filmstrips are scanned, gently pull it out from the
feed slot.
To power down the scanner, press and hold the power button for one second. The power indicator
blinks and then goes off.
Now you can safely disconnect the power and remove the memory card from the scanner.
 The scanner automatically turns off if it's left idle for 5 minutes. (If it's connected to a computer, the
scanner does not automatically turn off.)

Automatic Image Cropping

The scanner has a built-in cropping function that detects and crops dark edges of an original during the scan process
(see following illustration).
Original size
When original size is
larger than 5"x7"
When original size is
smaller than 5"x7"
All manuals and user guides at all-guides.com
Cropping size (as measured on the original)
Scanning direction
A
Original
Cropping size (as measured on the original
A
3 mm
1.5 mm
1.5 mm
B
C
D
Scanned image
B
C
D
3 mm
3 mm
3 mm
1.5 mm
1.5 mm
Customer Support: http://www.pandigital.net/kodaksupport
13

Publicidad

Tabla de contenido
loading

Tabla de contenido