Tabla de contenido
Publicidad
2
Safety instructions
Before operating Bode 100 and its accessories, read the following safety instructions carefully. If you
do not fully understand any safety instruction or any part thereof, contact OMICRON Lab before
proceeding. When working with Bode 100, observe all safety instructions in this document. You are
responsible for every application that makes use of an OMICRON or OMICRON Lab product. Any
miss-operation can result in damage to property or persons. Maintenance and repair of Bode 100 and
its accessories is only permitted by qualified experts either at OMICRON Lab or at certified repair
centers.
Following these instructions will help you to prevent danger, repair costs and possible down time due
to incorrect operation. Furthermore, it ensures the reliability and life-cycle of Bode 100.
Use Bode 100 in observance of all existing safety requirements from national standards for
accident prevention and environmental protection.
Reading the Bode 100 manual alone does not release you from the duty of complying with all national
and international safety regulations relevant for working with Bode 100.
2.1
Operator qualifications
•
Testing with Bode 100 must only be carried out by qualified, skilled and authorized personnel.
•
Personnel receiving training, instructions, directions, or education on Bode 100 must be under
constant supervision of an experienced operator while working with the equipment.
•
Testing with Bode 100 must comply with the on-site safety instructions as well as additional
relevant documents.
2.2
Rules for use
•
Bode 100 is exclusively intended for the application area specified in this document. The
manufacturer/distributors are not liable for damage resulting from a use other than the specified
operation. The user alone assumes all responsibility and risk.
•
Use Bode 100 only when it is in a technically sound condition.
•
Do not open Bode 100 or remove any of its housing components.
•
The Bode 100 does not contain any serviceable parts. Do not open the Bode 100 or carry out any
modifications, extensions, or adaptations.
•
Use Bode 100 in observance of all existing safety requirements from national and international
standards for accident prevention and environmental protection.
•
Always keep the manual either printed or as PDF file at the site where Bode 100 is used. The
manual must be read by all people working with Bode 100. In addition to the manual and the
applicable regulations for accident prevention in the country and at the site of operation, heed the
accepted technical procedures for safe and competent work.
OMICRON Lab
Safety instructions
7
Publicidad
Tabla de contenido
