Piaget 560P Instrucciones De Uso página 8

561P | 562P
Adjusting the functions
Winding the movement
Self-winding watches are wound by the movement of the wrist when the watch is worn. If the watch has
not been worn for around 40 hours, wind it by hand with the crown in position 0, that is turn the crown in
the forward direction (around 10 turns of the crown are sufficient to restart the mechanism).
Setting the time (561P)
Pull the crown out to position 2, then turn it forward or backward to adjust the position of the hands.
The mechanism is equipped with a balance-stopping device. Pulling the crown out to position 2 will
stop the movement. Push the crown back to position 0 after the adjustment.
Setting the date (561P)
Pull the crown out to position 1, then turn it forward to select the desired date. Since the date change
occurs at midnight, make sure you distinguish midnight from noon when proceeding to the adjustment.
In order to avoid damaging the mechanism, we advise you not to adjust the date between 9 p.m.
and 3 a.m. Push the crown back to position 0 after the adjustment.
Setting the time (562P)
Pull the crown out to position 1, then turn it forward to adjust the position of the hands. The mechanism
is equipped with a balance-stopping device. Pulling the crown out to position 1 will stop the movement.
Push the crown back to position 0 after the adjustment.
12
561P | 562P
Self-winding mechanical movements, retrograde seconds, power reserve indicator,
date (561P)
Retrograde
seconds
15
0 30
Date (561P)
FORWARD
0 - 1 - 2
BACKWARD
Power
reserve indicator
13