Tools Required; Parts List - Foundations 5411339 Instrucciones Para La Instalación

• Be aware of the risk of open fires and other sources of strong heat, such as electric bar fires, gas fires,
etc. in the near vicinity of the changing unit;
• Do not use the changing station when any part is broken, torn or missing.
• Any additional or replacement parts shall only be obtained from Foundations;
ADULT INSTALLATION REQUIRED.

TOOLS REQUIRED:

Level (A)
Measuring tape (B)
Power drill with 7/32", 1/8" and 1/2" masonry bits (C)
Power screwdriver with bull nose phillips bit (D)
•
READ ALL INSTRUCTIONS BEFORE ASSEMBLY OF Diaper Changing Station.
•
Unpack carton and identify all parts.
Parts Description
Hardware for installation:
3" Wood Screws
3/4" Finishing Washers
3" Machine Screws
3/4" Flat Washers
Toggle Anchors
1-1/4" Caps
Door / Wall Plate
3" Wood Screws
34 5/8"
881 mm
WARNING
ASSEMBLY INSTRUCTIONS

PARTS LIST

For Wood Studs:
3/4" Finishing Washers 3/4" Flat Washers
Toggle Anchors
397 mm
17"
431 mm
A
C
3" Machine Screws
1-1/4" Caps
15 5/8" A.D.A. Compliance:
1
B
D
Quantity
For Use With Toggle Anchors:
Door / wall plate to be
mounted on outside of
restroom door.
(Style may vary)
306.3 Knee Clearance
307.2 Maximum Protruding Objects
308.2 Forward Reach
308.3 Side Reach
309.4 Operation
902.3 Work Surface
Compliant when properly installed.
4
4
2
4
2
6
1