Liability; Warranty; Copyright; General Safety Instructions - flamco Vacumat Eco Manual Del Usuario

1. Liability

All technical information, data and instructions contained in these operating instructions for practical operations and those to be performed
are correct at the time of going to press. This information is the result of our current findings and experience to the best of our knowledge. We
reserve the right to make technical changes subject to the future development of the Flamco product referred to in this publication. Hence
no rights may be derived from technical data, descriptions and illustrations. Technical pictures, drawings and graphs do not necessarily
correspond to the actual assemblies or parts as delivered. Drawings and pictures are not to scale and contain symbols for simplification.

2. Warranty

Warranty specifications can be found in our General Terms and Conditions and do not form part of this manual.

3. Copyright

This manual must be used confidentially. It may be circulated among authorised personnel only. It must not be given to third parties. All
documentation is protected by copyright. Distribution or other forms of reproduction of documents, even extracts, exploitation or notification
of the contents hereof is not permitted, where not otherwise specified. Infringements are liable to prosecution and payment of compensation.
We reserve the right to exercise all intellectual property rights.

4. General safety instructions

Disregard or lack of attention to the information and measures in this manual may pose a hazard to people, animals, the environment and
tangible assets. Failure to observe the safety regulations and the neglect of other safety measures may lead to the loss of liability for damages
in the event of damage or loss.
Definitions
• Operator: A natural person or legal entity who is the owner of the product and uses the aforementioned product, or is nominated to use it,
under the terms of a contractual agreement.
• Principle: The legally and commercially responsible purchaser in the implementation of construction projects. Can be both a natural
and a legal entity.
• Responsible person: The representative appointed to act by the principle or operator.
• Qualified person: Any person whose professional training, experience and recent professional activity gives them the requisite
professional knowledge. This implies that such people have knowledge derived from relevant national and internal safety
regulations.
4.1

Purpose and use of this manual

The following pages list the information, specifications, measures and technical data that allow the relevant personnel to use this product
safely and for the intended purpose. Responsible persons or those engaged by them carrying out the required services must read this manual
attentively and understand it.
Such services include:
storage, transportation, installation, electrical installation, commissioning and re-starting, operation, maintenance, inspection, repair and
dismantling.
Where the product is to be used in plants / facilities which do not comply with harmonised European regulations and relevant technical rules
and guidelines of professional associations for this field of application, the present document is purely for informative and reference purposes.
As this unit may be subject to unlimited inspection at all times, this manual must be kept in the immediate vicinity of the installed unit, at least
within the confines of the operations room.
4.2

Qualifications required, assumptions

All personnel must have the relevant qualifications to carry out the required services, and be physically and psychologically capable. The area
of responsibility, competence and supervision of personnel is the duty of the Operator.
6