Installation As A Bike Trailer - Hauck DRYK DUO Manual De Instrucciones

2.2. INSTALLATION AS A BIKE TRAILER

F
F
- GB 11 -
PREPARING OF
1
THE BIKE TRAILER
Tilt the trailer backwards to make
handling easier. Push the second
fuse [F] to the side of the mounting
plate for the drawers.
Then you can pull the safety pin out
of the mounting plate.
2
FASTENING OF THE DRAWBAR
Slide the end of the drawbar into the
holder from the bottom. Then tilt the
drawbar forward until it is properly
engaged in the fastening.
3
SECURING OF THE DRAWBAR
Put the safety pin through both
holes in the fixation plate. Slide the
second fuse [F] in front of the safety
pin to prevent the drawbar from
slipping out.