Alcad PDK-64711 Manual Del Usuario página 18

Make the electrical connections. See the
wiring diagrams (pages 9 to 11).
P r o g r a m m e t h e c o n n e c t i o n s
brackets/telephones from the main entrance
panel (See "programming instructions".
page 13 ).
Close the panel, press it against the flush-
mounted box and fix it to this using the
clamping screws.
2 - W I R E D O O R
Make the connections between the audio
unit and the different elements of the panel
(keypad, speaker-microphone module,
camera module, etc.). See “How to connect
the audio unit to the keypad panel”, page
12.
Adjust the volume level on the entrance
panel (1) and on the monitors/telephones
(2).
ATTACHING ENTRANCE PANELS WITH BOLTS
Do not use flush-mounted boxes for
entrance panel models with bolts. Rather,
attach the entrance panel directly using
the nuts provided.
E N T R Y S Y S T E M S
Configure the entrance panel. See
"Entrance panel with keypad configuration
instructions", page 19.
Place the protective cover of the audio unit
in position.