Conformity Declaration - Sagola Mini XTREME Manual De Instrucciones

20.

Conformity Declaration

In accordance with UNE-EN ISO/IEC 17050-1 (ISO/IEC 17050-1:2004)
Manufacturer: SAGOLA, S.A.
Address:
Hereby declares that the product: SPRAY GUN
Brand:
Range:
BATCH:
In accordance with the Esential Security Provisions on the Annex of the Directive 94/9/CE.
To fulfil those requirements, the product meet the European standards:
• Directive regarding machines (Directive 89/392/CE) and the regulations concerning
the transposition thereof.
The following standardised regulations have been applied:
EN 292-1, EN 292-2, EN-349, EN-563, EN 1953
These also meets the following Regulations and Directives:
Non electrical equipment:
ATEX Directive (Directive 94/9/CE)
Protection Level II 2G Suitable for use in Zones 1 and 2
"X"marking All static electricity is discharged through air pipes (the air hoses must be
"STATIC-FREE")
It is also in conformity with the following directives: UNE EN-13463-1 Non electrical equipment
used for potentially explosive atmospheres
Full technical documentation and service instructions are available.
In Vitoria-Gasteiz on 01/12/2010
Urartea, 6 01010 VITORIA-GASTEIZ (Alava) SPAIN
SAGOLA
MINIXTREME
(See the back page of this Manual)
II 2G X
ENGLISH
Signed