Home Decorators Collection YG528-BN Guía De Uso Y Cuidado página 14

Assembly — Hanging the Fan (continued)
7a
Standard ceiling mounting
WARNING: Make sure the tab on the mounting bracket (A)
properly sits in the groove in the hanger ball (E) before
attaching the canopy (C) to the mounting bracket (A) by
turning the canopy (C) until it drops into place.
WARNING: The locking slots of the canopy (C) are provided
only as an aid to mounting. Do not leave the fan assembly
unattended until all four canopy mounting screws with lock
washers (BB) are engaged and firmly tightened.
□
Slide the canopy (C) up to the ceiling. Make sure you
have placed the wires safely into the outlet box
(MM).
□
Secure the canopy (C) to the mounting bracket (A)
with the four canopy mounting screws with lock
washers (BB) included with your fan.
□
Slide the canopy ring (B) over the canopy (C) and
tighten by turning the ring (B).
BB
E
C
7b
MM
BB
A
B
14
Close-to-ceiling mounting
WARNING: Locking slots of the canopy (C) are provided
only as an aid to mounting. Do not leave the fan assembly
unattended until all four canopy mounting screws with lock
washers (BB) are engaged and firmly tightened.
□
Remove the fan from the hook on the mounting
bracket (A).
□
Secure the canopy (C) to the mounting bracket (A)
with the four canopy mounting screws with lock
washers (BB) provided.
□
Slide the canopy ring (B) over the canopy (C) and
tighten by turning the ring (B).
BB
C
BB
A
B